Product Reviews

Fauxwood Shutters

Our fauxwood plantation shutters are custom made in just 7 days and they're 25% less expensive than custom-sized wood shutters. Available in inside (L-Frame or Z-frame; see gallery for image of Z-Frame) or outside mount, 2-1/2" or 3-1/2" louvers. Since these plantation shutters are not made of wood, cleaning is as simple as using a damp cloth or sponge without fear of harming the satin finish. Highly resistant to moisture and damage, use our faux wood shutters in your bathroom or anywhere kids or pets are especially active. Impressive quality with a Lifetime Warranty. Most come to you fully assembled, with all mounting hardware and easy-to-follow installation instructions; so our shutters are easy to install. Our fauxwood plantation shutters bring you the beauty of custom window shutters at an affordable price! Lifetime Limited Warranty. About 25% less expensive than custom-sized wood shutters. Custom-made in 7 business days. Easy to install. Use ordinary household tools. Most come fully assembled. Low maintenance; never requires painting. Resists moisture; easy to clean with just soap and water. Will not fade, crack, peel, or warp. Color shown in picture is Daisy White 900. We've made ordering window shutters as easy as can be. Everything you need to know about shutters and ordering them online is right here on this page. So read below (you can also use the bulleted links above to the right). Then when you're ready, press the "Customize & Purchase" button. Money saving tip: Each shutter order incurs a $70 oversize fee, so save money by ordering all your shutters at one time! How to OrderNeed Help?  Choose color: Daisy White, Off White, or Cream; normally it's best to match the trim or sill color.Choose louver size: 2 1/2" or 3 1/2" The 2 1/2" size is more traditional, and better-suited for Colonial and Victorian styled homes. The 3 1/2" size is more contemporary, but is perfectly fine in traditional homes. The larger the window, the more likely the 3 1/2" size is scaled better. But it is usually best NOT to mix sizes within your home.    Determine the configuration: Determine if your window sill protrudes:For each of your windows see if you have a window sill that protrudes out into the room. This will determine how your shutter's frame is designed.Determine your window depth & mount:   Window DepthMeasure from the front edge of your drywall or front edge of trim surrounding your window opening back to the first obstruction. This could be a handcrank, security device, ledge, or the window itself. Note whether this distance is 1½" or more. If so, you can select an Inside Mount. MountDecide whether you want the shutter to mount recessed within your window opening, known as an "Inside Mount", OR outside the window opening on the trim (if any) or directly on the wall, known as an "Outside Mount". We usually recommend an Outside Mount, because windows are not normally perfectly square, and Outside Mount shutters are more forgiving. Also keep in mind that if you have less than 1½" of depth in the previous step it must be an Outside Mount. Measure your windows (width & height): Available for rectangular and square windows only(specialty shapes such as arch/angle tops not available). Cafe shutters, sometimes called "half shutters" can also be made for you. They normally cover the bottom half of your window, but can be made at any height. Please specify the height of the cafe shutter, NOT the window height. Determine if you need/want a divider rail: Divider rails add strength to your shutters, and allow you to operate the top louvers independently from the bottom louvers. Note: Center line location of divider rails may vary up or down by a maximum of 1" (for 2 1/2" louver) and by 1 1/2" (on 3 1/2" louver).

Average Customer Rating: 4.6 out of 5 Rating Snapshot (55 reviews) 5 stars 39 4 stars 11 3 stars 2 2 stars 3 1 star 0

52 of 55 (95%) customers would recommend this product to a friend.